The good news is that we’ve got the right fixes for you in this detailed guide.

Why is my PC beeping continuously?

The most likely reason your PC keeps beeping continuously is a memory issue. In most cases, this is usually due to a faulty RAM or a poorly connected one. On rare occasions, the problem might be down to issues with your video card or hard disk.

What can I do when my PC doesn’t boot and beeps?

1. Check the video card

Firstly, to fix the computer that is continuously beeping when turned on, you need to check the video card whether is dusty or defective. The dusty video card can also prevent the computer from turning on. Therefore, you need to clean up the video card/graphics adapter. To do this, you need to acquire an engineering toolbox. If the video card is defective, it will be best to replace it with another one. Lastly, if you are not sure of what you are doing, it is advisable to take your PC to a technician to help you check it out.

2. Check the RAM

In addition, faulty RAM can cause your computer to beep continuously when turned on. The first thing you need to check here is whether the RAM is firmly inserted or loosened. If the RAM is properly seated and you have two of them, you can swap their positions and check if the beeping continues. If you notice that the RAM is defective, you have no choice but to replace it.

3. Check the PC-to-HDD connections

Sometimes, while carrying your PC up and down, the wires may be unfastened and wobbling, causing your computer to beep continuously when turned on. Therefore you need to check the PC-to-HDD connections and tighten them. Also, you can clean up the PC of dust, re-seat RAM, CPU/HSF, GPU, and PCI cards, and then apply thermal compound to balance them. Again, you must be sure of what you are doing to avoid further problems. If you don’t know how to go about this, you can seek the help of an expert. But before doing that, you can perform an HDD check by using one of the HDD checkers from this dedicated list. However, we highly recommend you consult a computer technician to help you with this solution.

4. Replace your Hard Disk Drive (HDD)

If all the solutions above fail to stop your the continuous beeping on your computer when it is turned on, you might need to replace your hard drive. However, before doing this, we recommend that you test the hard drive first. You can use and hard drive tester. Also, you try to repair bad sectors on the drive and check if that fixes the issue. Another thing you can try is to remove your HDD, connect it to another PC to access the files and folders, and check if it boots up from the hard drive. If the PC is unable to identify and access the HDD, then you need to replace it with a new one. To make an informed decision, check our list of the best hard drives for Windows 10. That should do for this guide on how to fix the continuous beeping when the computer is turned on issue. Feel free to let us know the solution that helped you fix this issue in the comments below.

Name * Email * Commenting as . Not you? Save information for future comments
Comment

Δ