But, maybe the most popular feature that can be used in Windows 10 and Windows 11 is Wake-on-LAN. Unfortunately, more and more users are complaining about WOL issues, which means that we must find a way to fix these problems. So, due to some reasons, if the Wake on LAN is not working on your device, try to use the guidelines from below in order to easily correct that.

Why is my Wake-On-LAN not working?

Wake-on-LAN not working after shutdown, over Internet, after a long sleep – There are various problems with Wake-on-LAN that can occur and users reported that they are unable to wake their PC over Internet or after a long sleep. ASUS Wake-on-LAN not working – This problem can appear on almost any PC and many ASUS users reported it. To fix the issue, you need to update your driver or your BIOS. GIGABYTE Wake on LAN not working – This issue can also come up on PCs that run GIGABYTE hardware. Shutdown Wake-on-LAN Realtek – Many Realtek owners reported this issue with Realtek network adapters. In most cases, you can fix this problem by updating your drivers or by making a few changes in your registry. Wake-on-LAN in BIOS – In order to use the Wake-on-LAN feature, first you need to enable it in BIOS. In addition, you also have to disable Deep Sleep mode as well. If you don’t see these options available, update your BIOS to the latest version.

How can I fix Wake On LAN not working on my PC?

1. Disable Fast Startup

Fast Startup is a feature that can be activated or disabled from your Windows 10 settings. When enabled, you will be able to power off your device faster than usual. But, in some cases, the WOL protocol will not work when the mentioned feature is activated. Therefore, you need to disable it to fix the problem. After making these changes, check if the Wake-on-LAN feature is working. When you can’t perform this procedure, learn how to fix Control Panel if it’s not opening.

2. Use Network Configuration Settings

If you can’t perform this method our solutions on how to fix the Start button will help you solve this problem right away. Most users don’t know what to do when the Windows key stops working.

3. Install the older network driver

If Wake-on-LAN is not working in Windows 10, the problem might be related to your network driver. According to users, they managed to fix the issue simply by installing the older version of their network driver. Once the default driver is installed, check if the problem is resolved. If the issue persists or if that default driver doesn’t work at all, install the driver that you downloaded in Step 1. After installing the older driver, check if the Wake-on-LAN feature works. If the older driver solves the problem, you’ll have to prevent Windows from automatically updating it in the future.

4. Install the latest network driver

Problems with the Wake-on-LAN feature can be caused by your network drivers, and if you have this issue, you should try removing your current network driver and updating it to the latest version. We mentioned how to remove and download the driver for your network adapter in Solution 3, so be sure to check it out for detailed instructions. Once your network driver is up to date, the issue should be completely resolved, and you’ll be able to use the Wake-on -LAN feature again. If you don’t want to fix the drivers manually, we suggest doing it automatically by using third-party software which will download and update the drivers that better match your needs. These applications have been developed to prevent PC damage due to incorrect driver versions installations. After you select the drivers to update, the software will do all the work on your behalf automatically.

5. Check your BIOS settings

After enabling these features the problem should be resolved. If you can’t enter BIOS, follow our solutions on what to do if your PC skips BIOS.

6. Modify your registry

6.1 Find the Registry key for your network adapter 6.2 Change the network adapter Registry key values If Wake on LAN isn’t working in Windows 10, the problem might be related to your registry. To fix the issue, you need to find your network device and change its settings. 6.3 Change the NDIS Parameters key

7. Change your power plan settings

According to our readers, you might be able to fix the problems with the WOL not working simply by changing your Power Settings so follow the steps above to do that. SPONSORED

8. Upgrade BIOS

If you’re having problems with Wake-on-LAN, you might be able to solve them by updating BIOS to the latest version. BIOS update is a complicated procedure, and it can be potentially dangerous if you don’t perform it properly. To see how to properly update your BIOS, be sure to check your motherboard manual for detailed instructions. In addition to upgrading BIOS, a few of our readers reported that downgrading BIOS to the older version fixed the problem for them, so you might want to try that if the BIOS upgrade doesn’t work.

9. Reset BIOS and enable APM

If Wake-on-LAN isn’t working, you might be able to fix the problem simply by resetting your BIOS. You can do that from BIOS or by removing your battery from the motherboard for a couple of minutes. Again, this is a delicate procedure so you should check the precise instructions from your manufacturer or leave this for professionals. If opening the PC case voids your warranty, do not attempt this. After resetting your BIOS, be sure to enable APM in BIOS. You can do that by going to the Advanced section. Once you do all that, Wake-on-LAN should start working.

What can I do if Wake On LAN is not working on Windows 11?

Although the solutions above are technically for Windows 10, you can safely use them on a Windows 11 PC as well to solve WOL issues. The steps to solve Wake on LAN not working on Windows 11 are mostly the same, and the best solution remains tweaking your Power Settings.

What is Wake-on-LAN?

Wake-on-LAN is a Windows default feature that basically allows a computer to be turned on by a network message. This awakening message will be sent from a program that is running on another computer, laptop, tablet, or desktop, which is located on the same local area network. Wake-on-LAN can be easily and safely used on any Windows 10 based device, though in rare cases you might notice that you can’t use this protocol. This is a useful feature that allows you to wake up your PC remotely, but sometimes issues with it can occur.

How can I find the MAC address on Windows 10?

To use the Wake-on-LAN feature and wake up your or another PC from sleep, you will need its Mac address which is a unique 12 digit code for any network adapter. There are a few ways to find out that information but we’re going to show you only the easiest method below: Now, the Wake-on-Lan feature should be working just fine on your Windows device. If these steps aren’t useful for you, try to put your computer to hibernate instead of shutting it off – usually, this is resolving all the problems. And while we are on the subject, you might be interested in the best remote PC wake-up software to use right now. We also have a list of the best VPN for LAN that you can use right now to ensure your privacy. Be careful because the Wake-on-LAN is a two-way street feature. If someone has physical access to your PC, it can set it up to be awakened and control it afterward with remote software. This can cause a major breach of your data so if it’s not absolutely necessary to enable the Wake-on-LAN, don’t do it. Also, use the comments field below if you have questions regarding the Wake On LAN not working issue or if you need our assistance and we will get back to you as soon as possible.

Name * Email * Commenting as . Not you? Save information for future comments
Comment

Δ