But this type of storage stick can be problematic at times when it stops working on your TV. We’ve taken the time to dig through some of the possible solutions to this problem.

Why is my TV not Reading my USB?

The quickest way is to check your TV’s ports and make sure they are fine. In most cases, a dusty or faulty USB port is the cause of the issue. After that, update the firmware on your TV and then format your USB drive in FAT32. Without further ado, let’s jump in and look at what we think could help get your USB working back on your TV.

What can I do if my USB drive is not working on the TV?

1. Check the condition of the USB ports on the TV

One possible cause for the USB device not working on TV is the burnt-out ports. Check the status of the USB ports on your TV and ask for a repair service from the manufacturer if the ports are in bad condition. Also, make sure that the ports are free from dust. Sometimes, the build-up of dust on ports can cause minor problems with the connection.

2. Update the TV firmware

Another probable cause that can prevent USB devices from working properly on a TV is outdated firmware. Make sure you have installed the latest firmware on your TV. Otherwise, look for the updated TV firmware from the manufacturer’s website and refer to the Readme file.

3. Format USB in FAT32/exFAT

Most USB drives are shipped in the NTFS file system by default. It appears that many TV brands do not support this type of format. More often, you will need to format your USB device in FAT32 or exFAT as most TV sets require these file systems. Before you do so, be sure to transfer all the files stored in the USB drive to a backup location for later retrieval. After you have done so, perform the following: Note, however, that a drive formatted in FAT32 will limit the total size of files you can store to 4GB and below. Keep in mind that if you have a USB 3.0 drive and your TV has only 2.0 ports, it might not work because of the power output of your TV. Also, on older TV models, the USB drive won’t be automatically detected and you’ll have to open it manually. Go to your Source options on the TV and browse to USB/Media device and choose it manually. If you know another workaround for a faulty USB device-TV connection, please let us know in the comments section below.

Name * Email * Commenting as . Not you? Save information for future comments
Comment

Δ